HARDWARE AND EMMC


    • IC reballing.
    • Fresher method for Installing Power, Charging, CPU & EMMC IC’c along with heat and air settings.
    • Removing pasted/glued IC’s using different methods.
    • Cleaning paste/glue from motherboard and IC’s without any track damage or scratches.
    • Regular & Micro jumpers below IC’s & tracks on motherboard to restore connectivity/line/track.
    • Tried and tested method to perfectly reball then install EMMC & CPU on the first attempt.
    • Creation and application of GR.
    • Tracing and resolution/solution of Half and Full short.
    • Section wise training and troubleshooting/fault finding, example: Power, charging, light, graphics, network, ringer, speaker, headphone, wifi/Bluetooth, touch, mic etc.
    • Dead EMMC recovery using UMT logs.
    • EMMC Programming using UFI and JTAG.
    • Process to upgrade internal storage/memory of android mobile phone.
    • Offline unlock pin, pattern & FRP of all online android phones without any dead risk.
    • Data recovery through swapping EMMC & CPU.

S.S.L.C | H.SC | DEGREE

60 DAYS

Course Details

All i-PHONE ASSEMBLE & DISASSEMBLE IN SAFE WAYS
INTRODUCTION , How to assemble and disassemble 6TO 6S PLUS , How to assemble and disassemble 7TO 8. PLUS , How to assemble and disassemble X, XS, XS MAX , How to assemble and disassemble 11 OR XR ,How to assemble and disassemble 11 pro or 11 pro max , How to assemble and disassemble 12 series or 13 series.
HOW TO SEPARATE FRONT GLASS 6 TO 13 PRO MAX.
INTRODUCTION ,How to Separate Front Glass 6 to 6s plus , How to Separate Front Glass 7 to 8 plus , How to Separate Front Glass X, Xs, Xs Max ,How to Separate Front Glass 11, Xr , How to Separate Front Glass 11pro or 11 pro Max , How to Separate Front Glass Series 12 or Series 13 , How to Replace Back Glass i,phone 8 to13 Pro Max Without Open Handset (No Need to Buy Laser Machine).
How to replace touch x to 13 pro max
INTRODUCTION , How to Replace Touch X, Xs, Xs Max. , How to Replace Touch 11,XR , How to Replace Touch 12 Series or 13 Series.
Chapter -3
INTRODUCTION , How to Set all Machine Temperature, Pressure, Holding Time & Vaccume.,  How to Make Molds (Die) for Display Punching ,How to Alignment White Display & Glass ( i,phone 6 to 8 Plus) , How to Alignment Black Display & Glass ( 6 to 8 plus) , How to Alignment Display & Glass X, Xs, Xs Max, 11 pro, 11 pro max , How to Alignment Display & Glass XR,11 , How to Alignment Display & Glass 12 Series or 13 Series
Chapter - 4
INTRODUCTION ,  How to Soldering Touch Flex X, Xs, Xs Max , How to Remove Display Important Message 11,12 &13 Series ,  How to Apply Display Ring X Series, 11 Series, 12 Series,13 Series ,  How to Turetone With Original Display or Without Original Display (Term & Conditions) , Apple I,Watch Front Glass & Touch Separate Series 1 to 7 & SE.
Chapter -5
INTRODUCTION , How to Assemble and Disassemble i,Watch Series 1 to Series 7., How to Separate Touch or Glass Series 1 to Series 3., How to Separate Front Glass Series 4 to Series 7 , How to Separate Only Touch Series 4 to 7.
Chapter - 6
INTRODUCTION , How to Make Molds (Die) for Display Punching ,  How Alignment Display & Glass Series 1 to 7 , How to Punching Series 1 to Series 7.
Chapter - 7
INTRODUCTION ,  How to Replace Back Glass i,phone 8, 8 plus,(Use Same Trick) , How to Replace Back Glass X,Xs,Xs Max same Method (Big Hole) ,
How to Cut Camera Ring X, Xs, Xs Max for Change Small Hole Glass , How to Replace Back Glass 11 , How to Replace Back Glass Xr , How to Replace Back Glass 11 pro or 11 pro max , How to Replace Back Glass 12 Series or 13 Series , How to Install Back Glass 8 to 8 plus (with original fitting) , How to Install Back Glass X Series (With original Fitting) , How to Install Back Glass 11 Series ( With original Fitting) , How to Install Back glass 12 Series or 13 Series. (With original Fitting) , How to Replace Glass of All Samsung, Oppo, Vivo, Oneplus Edge Model (Method In,Frame & Out,Frame) 99% Successful.
NO NEED BUY COSTLY FREZZER AND MOLDS (DIE)
INTRODUCTION , How to Assemble & Disassemble all Edge Model Use Same Trick ,  Learn Theory and Practical Important Tips & Trick All Edge Model (separate Front Glass) , How to separate Front Glass s8, s8 Plus, s9 plus, Note 8 note 9. (In,frame same method) , How to Cut Touch Flex s8 plus or note 8
How to separate Front Glass s10, s10 plus (same method) , How to separate Front Glass Note 10 or Note plus (same method) , How to separate Front Glass s20 plus , How to separate Oneplus 7pro Front Glass ,  How to separate Oneplus 8pro Glass , How to Replace Oneplus 9pro Front Glass , How to Clean Display After Separate Glass.(Samsung, Oppo, Vivo, Oneplus, ( Use same tricks) , How to Clean Display s20, s21, s22 series , How to Remove Display From Frame After Separate & clean Display same method all display (Important Video).
(Out Frame Method)
INTRODUCTION , How to Remove Display from Frame All Edge Model (Use Same Trick) ,  How to Separate Front Glass Samsung, Oppo, Vivo, Oneplus All Edge Model (Out , Frame Method) Use Same Tricks. INTRODUCTION , How to Make Molds (Die),  How to set pressure, Temperature, Holding Time Soft Mate Rubber & Black Mate Rubber, Magic Mold and Vietnam mold , How to Apply OCA Edge Model with Different Method,  How to Pressing Display & Glass all Edge Model on Vietnam Mould , How to Pressing Display & Glass all Edge Model Magic Rubber , How to Pressing Display & Glass Black Soft Mate Rubber.
Service And Training
Flex Bonding Machine ,  IPhone Back Glass Laser Remover Machine Fiber Laser Marking Machine ,  laser film cutting machine , ALL Brand OCA Machine
All Mobile Service Machinery

Services


Web Design


Web Development


Software Development


Mobile Application


Digital Marketing


SEO

GRAPHICS SERVICES

Creative Graphics design and digital agency based in Salem with 15+ years experience. We are team of professionals expertise in logo design, graphic design, brochure design,product package design, website design, e-commerce, seo and much more.

  • LOGO DESIGN

    Single Color | Multi Color | Printing Media

  • VISITING / BUSINESS CARDS

    Single Color | Multi Color | Printing Media

  • FLYERS & CATALOGUE

    Single Color | Multi Color | Printing Media

  • LETTER HEADS

    Single Color | Multi Color | Printing Media

screen
screensdst
screen_09
screen_07
screen_08
screen_06
screen_06
screen_06
screen_06
screen_06
screen_06
screen_06
  • ID CARDS

    Single Color | Multi Color | Printing Media

  • CERTIFICATES

    Single Color | Multi Color | Printing Media

  • DESIGN

    2d and 3d, Painting, Art DESIGN, Digital Art

  • SOCIAL MEDIA DESIGNProfile, Post, Logo Design

Products

WEB DESIGN

1000

LOGO DESIGN

1000

GRAPHICS DESIGN

1200

DIGITAL MARKETING

200

Training

IEEE PROJECTS

IEEE CSE PROJECTS

IEEE EEE & ECE PROJECTS

IEEE ANDROID PROJECTS

IEEE MECHANICAL PROJECTS

IEEE IOT PROJECTS

​IEEE MATLAB PROJECTS

Technologies

CLIENTS

Website Designing Companies in Salem, Website Designing Company in Salem, SEO Companies in Salem, Digital Marketing Companies in Salem, Web Maintenance Companies in Salem, Web Developers in Salem, Web Development Companies in Salem, Website Designer in Salem, HTML5 Websites Salem, Website Designing Company Salem, Expert Web Designers in Salem, Professional web development companies in Salem, Logo Designers in Salem, Website Maintenance Salem, Website Renewals in Salem, Digital Marketing Companies in Salem, SEO Company Salem, Social Media Marketing Experts Salem, Website designing for affordable cost in Salem, Business website for affordable price in Salem, Web Designing Dadagapatti Salem, Website Designers in Gugai Salem, Web Developers in India, Website Hosting India, Web Designers in Seelanaickepatty Salem, Web Designers in Pillukadai Busstop Salem, Web Designers in Dadagapatti Salem, Web Designers in Dadagapatti Salem, Web Designers in Gugai Salem, Web Designers in Old busstand Salem, Web Designers in Gugai Salem, Web Designers in Seelanaickenpatty Salem, Web Designers in parthiban Salem, Web Design in Trichy main road

LOCATION